DAHLE ShredMATIC® 90
Oil- and maintenance-free operation
Convenient feeding and reversing function for manual control
Extra-small particles allow for less frequent emptying
Overload indicator
Overheating protection with optical indicator
Intelligent document shredder for desk-side use
Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
Automatic paper reverse function clears excess paper
Two inspection flaps for easy cleaning of automatic paper feeder
Convenient casters for greater mobility
Automatic safety shut-off when the waste container is full or the door is open
Autofeed function shreds up to 90 sheets (80 gsm) in a single load
Manual feed of up to 10 sheets possible
Pull-out waste container
Dimensions (H x W x D): 506 x 367 x 263 mm
Optical waste level indicator


Technical data:

Product name DAHLE ShredMATIC® 90
Article number 35090-16180
Entry width in mm 222 mm
Sheet capacity (80g/sqm)* 1 - 90 sheets
Particle size (in mm) 4 x 12 mm
Security levels P-4/F-1/T-4/E-3
Run time 60min
Autofeed run time 60min
Cards Yes
Paper clips Yes
Waste collection volume (in l) 23 l
Noise level when idle (db) 62 dB(A)
Power consumption 240 W
Power supply 230 V
Weight net 9 kg
Speed (m/min) 1.8 m/min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.